VSS designed the Deadbolt System so that no auto electrical knowledge is needed to fit and activate. If you can use an electric drill and a pop rivet gun then you can install our system into your van. The Wiring looms are all plug and play. Amazon Pop Rivet Gun Here
The system comes with everything you need to install, including the 5mm rivets. You do not need any templates to fit them as they all come pre drilled, we supply you with a recommended measurement to position our deadbolts. The connecting up of the control box is simple, It is just 2 wires to connect up, 1 wire connects straight to your vehicles battery live terminal and the other connects to the earth terminal. The control box is safe guarded by a in house fuse.
Please download the fitting instructions and take note of the wiring layout below, Installation approx time to install is about 3 hrs.
We have a fail safe system that can be sent out to you if for some reason your deadbolts will not retract i.e lost fob.
There are many different applications for our remote operated Deadbolt Systems, Garage Doors - any Commercial Vehicle - cars - 4x4s - Internal/external doors, the list goes on.
We are now giving you the opportunity to purchase for you to make your own deadbolt systems up to suit your own applications.
Want to make your own bespoke system?
* Deadbolts will come with no drill holes in.
* You position the deadbolts to suit your own application.
* You fabricate your own clasps or locking plates to suit your own install.
* Every deadbolt will shoot out 67mm.
* You can add the shock sensor alarm system.
* Add extra key fobs up to 50 can be programmed to 1 system.
On Sale Now! Please visit our Shop Page
Deadbolts comes pre-drilled for your make of van.
Shock Sensor Installation
Main Wiring Loom Layout